Diy Wind Generator Blades

wind turbine size/type?

am trying to build a wind turbine that is capable of running an entire house from heating to tv however the location of that wind turbine is in a low wind speed area approx 5 miles per hour ,,,,my question is how many blades are preferable for low wind speed also the size of them,and should i use a VAWT or a HAWT,,,,,the alternator am thinking of using is a DIY axial flux generator but i am not sure how big it should be in order to supply that amount of power required ,,,everything about this wind turbine is a DIY ,,,,,thanks

for DIY, first task is to calculate how much energy you use on a daily basis, both peak and average.

Second task it to measure the average wind on an hourly basis.

Two decisions: 1. grid tie or lots of batteries. 2. If not grid tie, how many hours do the batteries have to supply your power in long calm periods.

Once you get this data, it's possible to calculate the size needed, but without it, I'd be just guessing.

email me when you get the info.

.

WIND TURBINE BLADE DIY how to video Part 2 HAWT Windmil

	GudCraft WG700 12-Volt 3-Blade 700 Watt Wind Generator List Price: $449.00 Sale Price: $425.00
	GudCraft WG700 model is 700W 12 volt Wind Generator. Fresh 2011 Version just shipped from the factory. This is the latest design with 3 new blades. This item is new in the factory unopened box. Charge controller is optional and not included.

	CMS 1000 WATT DIY DO IT YOURSELF WIND TURBINE/GENERATOR KIT 53" BLADE Sale Price: $468.75
	All items are BRAND NEW, never used and straight from the manufacturer FEATURES: Blades: Our blades are made from lightweight, yet durable fiberglass. With a S809 airfoil design, pronounced pitch, and tapered tip, these blades will start at the slowest wind speeds and give you power with low noise levels...

	GudCraft WG500 12-Volt or 24-Volt 500 Watt Wind Generator With Charge Controller List Price: $499.00 Sale Price: $445.00
	GudCraft WG500 model is 500W Wind Generator. It is a low wind speed, small-size wind generator with starting speed just 8mph. Yes. This model starts producing the wind energy just from 8mph wind. Fresh 2011 Version just shipped from the factory...

	Windmax HY400 500 Watt Max 12-Volt 5-Blade Residential Wind Generator Kit List Price: $699.00 Sale Price: $649.00
	Solar/wind Max: 650w, Wind only: 400w rated, Wind only Max: 500w, solar panel is not included.

Compare____________________________________________________

2-bolt, 3-blade Hub for Wind Turbine DIY $44.99

500W Wind Turbine Generator DIY KIT Wind Blades $365.10

1000W Wind Turbine Generator DIY Kit Turbine Blades $589.75

Defective Wind turbine generator 3 blade hub fits17MM pma shaft MADE IN USA DIY $15.00

Wind Turbine Generator DIY Kit w/127" Blades/Rectifier/25 Neo Magnets/Wire $649.00

Compare____________________________________________________

Superwind 350 Wind Generator Replacement Blades $289.99 Superwind 350 Generator Replacement Blades . Replacement Blade for 350 Wind Generator. Carbon-fiber reinforced blades, optimized to induce micro turbulence, combine outstanding aerodynamic performance with super-quiet operation. Integrated rotor control system continuously adjusts the pitch of the blades to minimize noisy stall effects and limit rotor speed during even the most extreme wind velocities.

Superwind 12v Wind Generator Kit $2299 Superwind 12v Generator Kit . We believe this to the best wind generator we have ever seen. If you demand the finest, choose Superwind. Carbon-fiber reinforced blades, optimized to induce micro turbulence, combine outstanding aerodynamic performance with super-quiet operation. Integrated rotor control system continuously adjusts the pitch of the blades to minimize noisy stall effects and limit rotor speed during even the most extreme wind velocities. Fully automatic, without electrical or hydraulic components, the design s mechanical pitch control eliminates the complexity of furling or securing the rotor in high winds. Three-phase, brushless, synchronous generator with Neodymium magnets and internal rectifier produces DC current. Aluminum housing and wind vane are powder-coated, all shafts, axles, bearings and bolts are stainless chromium steel. Kits include generator, charge controller, dumb load resistor bank and a stop switch. Pole kit sold separately. Number of blades: 3 Blade dia

Be Sociable, Share!

•